Description

Extension Cord with Motor Protection, Energy Meter and Phase Indicator 20m on a super heavy-duty blue PUR Cable 20m

If you are looking for a reliable and safe Extension Cord, the Hilark Extension Cord with overcurrent circuit breaker ETIMAT T 1p B16 code 002181073 is an excellent solution for protecting your electrical equipment, while the precise energy meter will allow you to monitor electricity consumption.

Thanks to the use of the overcurrent circuit breaker ETIMAT T 1p B16 code 002181073 , the Extension Cord provides maximum safety for the tools connected to it. The overcurrent circuit breaker protects the connected tools against overload and short circuit by disconnecting them from the power supply.

The Power Distribution Unit with energy meter and circuit breaker is mounted at a distance of approx. 50cm from the plug.

(There is the possibility of customising the Extension Cord to individual needs, i.e. mounting the Power Distribution Unit at any chosen distance from the plug)

Thanks to its properties, the Extension Cord can be used:

• both for personal, domestic use
• emergency lighting, in the garden, garage/workshop for Power Tools such as drills, circular saws, electric motors
• as well as in public buildings such as:
• hospitals, schools, production halls, shopping centres , agricultural farms,
• for safe powering of mass events: for stage equipment and audiovisual equipment
• also on construction sites with low-power tools

Thanks to the use of a PUR Cable H07BQ-F together with a high quality socket and PCE plug, and a Power Distribution Unit with a high Protection Rating IP65, in which the circuit breaker and energy meter are installed, the Extension Cord can be safely used in places where it is exposed to mechanical damage as well as various chemical agents. It is reliable in harsh weather conditions, in dry and damp locations both indoors and outdoors.

PLUG PCE UNI-Schuko; code 0521-ss, 16A 230V IP54

SOCKET PCE; code 2521-ss, Single Phase with cap 16A 250V IP54

• housing made of thermoplastic rubber TPE, which ensures a long service life of the product, material resistant to mechanical damage
• insert made of polyamide PA6
• Rewireable (Screw-Terminal), allowing for multiple reuse
• number of poles: 3
• earthing system: plug: uni-schuko; socket: Type E with earth pin
• IP Rating IP54: high Protection Rating guarantees resistance to dust and splashing water
• designed to easily and safely connect/disconnect to/from the power supply
• certified for use throughout Europe
• PCE products are made from the highest quality materials, which translates into durability, resilience and safety during use.

All devices are installed in the HERMETICA RN 1×3 Power Distribution Unit with Protection Rating IP65 (code: 2201-01) complying with the standards: PN-EN 62208:2011, PN-EN 60670-24:2013

Overcurrent circuit breaker ETIMAT T 1p B16 code 002181073

• Rated Current: 16A
• tripping characteristic: B
• number of poles: 1
• short-circuit current: 6 kA
• voltage type: AC
• Rated Voltage: 230 V
• rated frequency: 50/60Hz
• rated impulse withstand voltage Uimp: 6 kV
• Terminal capacity: 1-25mm²
• Rated short-circuit breaking capacity in accordance with standard EN 60898
• standards: IEC/EN 60898-1, IEC 60947-2
• function: MCB
• The overcurrent circuit breakers ETIMAT T 1p B16 code 002181073 are characterised by simple design, reliability and full compliance with the relevant standards; they have been developed for those who want to feel safe when working with Power Tools.

Energy meter code WZE-1

Single-phase electricity consumption meter with LCD display. Current 45 A.
WZE-1 is a static (electronic) calibrated electricity consumption meter for single-phase alternating current in a direct connection system.
The meter holds a MID conformity certificate.

Voltage indicator WNC‑3

directly displays the measured voltage values as numerical readings on a 3‑digit LED display. Voltages are displayed with a resolution of 1 V, and the measurement is updated five times per second. The measured voltage is simultaneously used to power the indicator. If the voltage drops below 80 V, the indicator display may switch off.

H07RN-F 3g2.5 450/750V Cables with EPR Insulation, Neoprene Rubber outer sheath:

• resistant to weather conditions, maintain high flexibility down to -25°C (maintaining a bending radius of 6D – where D is the diameter)
• resistant to oils and greases, to mechanical and thermal stress, coiling, uncoiling, pulling, twisting, impact
• perform well in cold and harsh industrial conditions, as well as in dry and damp locations,
• can operate in potentially explosive atmospheres
• the cable can continuously operate with Portable Equipment
• 100% Copper cores, Class 5 stranded
• Flame Retardant in accordance with the standard: EN 60332-1-2:2004, IEC 60332-1-2:2004

MADE IN POLAND

OUR CABLES ARE 100% COPPER

*the item for sale is one Extension Cord with one socket and one plug

The images presented are for illustrative purposes only. Actual colours may slightly differ from those shown in the images

Safety instructions: hilark.eu/gpsr/en.