Wago 2273-208 quick connector solid stranded wire 5×0.2-5mm2 10pcs

3,88 € (3,15 € netto)

Lowest price in the last 30 days: 3,88 €

Wago 2273-208 quick connector wire strand 5×0.2-5mm² 10pcs

Wysyłka tego samego dnia roboczego

SKU: 2273-208a/10/P Category: EAN: 5904422719838 Brand:

Description

WAGO terminal block, code 2273-208

The offer applies to 10 pieces

Wago quick connectors are innovative solutions that enable fast, reliable and safe connection of electrical wires without the need for traditional methods such as twisting or soldering.

Benefits:

  • Comfortable wire connection thanks to compact design
  • Plug-in installation of max. 8 solid wires
  • Wire cross-section range: 0.5 – 2.5 mm²
  • Ability to freely connect wires of different cross-sections
  • Installation of solid copper wires using PUSH WIRE® clamp
  • number of poles: 8
  • wire type: solid
  • maximum current: 24 A
  • rated voltage: 450V
  • wire stripping length: 11 mm / 0.43 in
  • wiring direction: side wiring
  • wire connection technology: PUSH WIRE®
  • clamp opening method: Push-in
  • connected wire material: copper, aluminium
  • dimensions: W 18 mm / 0.709 in; H 10.4 mm / 0.409 in; D 16.7 mm / 0.657 in
  • clamping spring material: chrome-nickel spring steel (CrNi)
  • contact material: electrolytic copper (ECu)
  • contact surface: tinned
  • fire load: 0.046MJ
  • ambient temperature (operation): +60°C
  • long-term operating temperature: 105°C
  • T designation acc. to EN 60998: T60

Connecting aluminium wires

WAGO spring clamp terminal blocks also allow connection of solid aluminium wires with cross-sections up to 4 mm², using Alu-Plus contact paste 249-130.

Advantages of Alu-Plus contact paste:

  • eliminates the oxide layer at the moment of wire clamping
  • prevents re-oxidation of the contact area
  • prevents electrolytic corrosion between aluminium and copper wires (within one terminal block),
  • provides long-lasting corrosion protection
  • For spring connections using the PUSH WIRE® clamp, it is recommended to clean the aluminium wire beforehand, and immediately afterwards connect it to the clamp filled with “Alu-Plus” contact paste. The WAGO Alu-Plus contact paste can also be additionally applied to the entire surface of the aluminium wire before connection. It should also be remembered to adjust the rated currents to the lower current-carrying capacity of aluminium wires according to the following relationship:
  • 2.5 mm² = 16 A
  • 4 mm² = 22 A

Safety information

Installations may only be carried out by persons with relevant knowledge and expertise in electrical engineering and holding appropriate qualifications.

Before use, please read the operating instructions attached to this offer.

Warning: operating and safety rules must be observed!

  • For use by qualified electricians only!
  • Do not work on live equipment!
  • Use only as intended!
  • Comply with national regulations/standards/directives!
  • Observe the technical specifications of the product!
  • Observe the permissible number of potentials on the terminal!
  • Do not use damaged/contaminated components!
  • Observe the recommended wire types, cross-sections and stripping lengths!
  • Insert the wire into the clamp up to the stop!
  • Use only original accessories!

Safety instructions: hilark.eu/gpsr/en.

Additional information

Weight0,003 kg
EAN (GTIN)

5904422719838

Kod producenta

2273-208 INSTALACYJNA UNIWERSALNA KOSTKA

Marka

Wago

Przekrój żyły

0.5–2.5

Liczba torów prądowych

8

Liczba sztuk w opakowaniu

10

Napięcie znamionowe

450

Maksymalne natężenie prądu

24

Cechy dodatkowe

do drutu

Reviews

There are no reviews yet.

Be the first to review “Wago 2273-208 quick connector solid stranded wire 5×0.2-5mm2 10pcs”

Your email address will not be published. Required fields are marked *